Prabha Trade Impex Pvt Ltd



Home

About Us

Products
 
Lubricants
    Problem Solutions
    Molykote 111
    Molykote BG 555
    Molykote P 37
    Molykote Range
    Molykote TP 42
    Molykote MOS2 Powder
    Molykote Zinc Spray

 RTV Silicone Sealants
  Engg / Auto Industry
    Silastic 732
    Silastic 733
    Silastic 734
    Silastic 736
    Silastic 1080
    Silastic Auto Sealant

 Solar Sealants
    SH 780

 
Release Products
    DC 200 Silicone Oil
    4P Silicon Spray

 
Paints
    Spray Paints

 Powder Coating
   OptiFlex Manual
   OptiFlex Automatic

 Metal Treatment Chemicals
   Frank Chemicals

 MG Chemicals
   Epoxies

   Protective Coatings

 EMI / RFI Shielding
   
Chomerics

 Leak Repair
   
AquaFix


Links

Contact Us

            


Silastic 734
RTV Silicone Sealant
Free flowing
Self Levelling
Single Component
Room Temp Curing
FDA Approved
Potting-Coating
General Purpose-Seals-Bonds-Caulks
Fastens-Plugs-Dampens-Gaskets-Protects
Insulates-Repairs-Waterproofs & more

 

Best for Industrial Use

Description :
Silastic 734 RTV self-leveling adhesive/sealant resists Weathering, moisture, vibration, ozone, and temperature extremes.
In addition, it stays flexible from -85 to 450 F (-65 to 232 C).

Important Features :
Ease of use - one part, no mixing required, Non shrinking.

Does not crack, crumble or dry out in direct Sunlight.

Excellent temperature range -65C to +232C.

Meets FDA requirement no. 21 CFR 177.2600 (formerly 121.2562) subject to end use compliance with any applicable total extractive limitations.

Bonds almost all surfaces.

Chemically stable.

Colours : White.

Uses : Primarily used in application where a free-flowing, one part is needed.

Applications include potting electrical terminals, coating mechanical devices, Sealing ammunition fuses, and making formed-in-place gaskets.

Limitations :
On contact, uncured sealant may cause irritation, avoid contact with eyes and skin.

Packing : 100 GM tube

Typical Properties :
Flow, sag or sump - nil
Tack free time at 24C & 50 % RH - 20 min.
Cure time at 25C & 50 % RH - 24 hours

As cured - Physical Properties :

ASTM D 2240 - Durometer Hardness, Shore A - 24
ASTM D 412 - Ultimate Tensile Strength - 220 psi (mpa)
ASTM D 412 - Elongation % - 370
ASTM D 624 - Tear Strenght, die B, ppi (kN/m) - 20 (3.5)
ASTM D 746 - Brittle Point , degrees : -100 F (-73 C)

As cured - Electrical Properties :

Volume Resistivity at 73.4 +\- 3.6F (23 +/-2C) Ohm-cm = 1.7 x 10 (to the power 15)

Dielectric Constant at 100 Hz = 2.7
Dielectric Constnat at 1,00,000 Hz = 2.7

Disspitaion Factor at 100 Hz = 0.007
Disspitaion Factor at 1,00,000 Hz = 0.0006

Dielectric Strength at 77F ( 25C) 75 mil thickness = 450 volts/mil

Caution : Users are advised to conduct their own tests to check suitability to specific applications.

Molykote, Silastic & Dow Corning are registered brand names of Dow Corning Corporation, USA.


Home | About Us | Lubricants | Problem Solutions | Molykote 111 | Molykote BG 555 | Molykote P 37
Molykote Range | Molykote TP 42 | Molykote MOS2 Powder | Molykote Zinc Spray | Silastic 732 | Silastic 733
Silastic 734 | Silastic 736 | Silastic 1080 | Silastic Auto Sealant | SH 780 | DC 200 Silicone Oil | Metal treatment Chemical
4P Silicon Spray | | Spray Paints | OptiFlex Manual | OptiFlex Automatic | Links | Contact Us

 

Flat no 1A, Bhavani Bhavan, Siripuri Colony, Karkhana, Secunderabad - 500 015

Telephone : +91 40 27743464 / 40206890

B Ravi Mobile: +91 9000420684


Mail/Fax your enquiries